Nibe SCU 10 - For Home Owners; To be Filled in When the Product Has Been Installed

General
NIBE SCU 10 is a control module designed to optimally control solar heating together with other heating equipment.
Rights to make any design modifications are reserved.
To be filled in when the product has been installed
The serial number, must always be stated in all correspondence with NIBE.
______________
Installation date
Installation engineers
AdjustedPossible settingFactory settingSystem no.
15–9065Menu 2.1 [N] Set temp tank1
4–407Menu 2.2 [N] dTStart tank1
2–353Menu 2.3 [N] dTStop tank1
15–9065Menu 2.4 [N] Set temp tank2
4–407Menu 2.5 [N] dTStart tank2
2–353Menu 2.6 [N] dTStop tank2
15–9560Menu 2.7 [N] Min rev pump
15–9557Menu 2.8 [N] Max temp T3 P3
15–9515Menu 2.9 [N] Min temp T3 P3
15–9515Menu 2.10 [N] Max temp T4 P3
Make any changes to the default settings here.
Date _____________________________ Signature__________________________________________________________________
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Rights to make any design or technical modifications are reserved.
©NIBE 2012.
SCU 102
For Home Owners
General