MENU 4.4 - WEATHER CONTROL
Activate weath. contr.
Setting range: on/off
Factor
Setting range: 0 – 10
You can select whether you want SMO S40 to adjust
the indoor climate based on the weather forecast here.
You can set factor for outdoor temperature. The higher
the value, the greater the effect from the weather fore-
cast.
Caution
This menu is only visible if the installation is
connected to myUplink.
MENU 4.5 - AWAY MODE
When away mode is activated, the following functions
are affected:
• the setting for heating is lowered slightly
• the setting for cooling is raised slightly (accessory is
required)
• the hot water temperature is lowered if demand mode
"large” or "medium” is selected
• The AUX function "Away mode” is activated.
If you want, you can select for the following functions
to be affected:
• ventilation (accessory is required)
• hot water circulation (accessories or use of AUX is
required)
MENU 4.6 - SMART ENERGY SOURCE™
Smart energy source™
Alternative: on/off
Control method
Alternative: Price / CO
2
If Smart Energy Source™ is activated SMO S40 priorit-
ises how / to what extent each docked energy source
will be used. Here you can select whether the system
will use the energy source that is cheapest at the time
or the one that is most carbon dioxide neutral at the
time.
Caution
Your choices in this menu affect menu 4.7 -
Energy price.
MENU 4.7 - ENERGY PRICE
Here you can use tariff control for your additional heat.
Here you can choose whether the system is to exercise
control based on the spot price, tariff control or a set
price. The setting is made for each individual energy
source. Spot price can only be used if you have an hourly
tariff agreement with your electricity supplier.
Set the lower tariff periods. It is possible to set two dif-
ferent date periods per year. Within these periods, it is
possible to set up to four different periods on weekdays
(Monday to Friday) or four different periods on weekends
(Saturdays and Sundays).
MENU 4.7.1 - ELECTRICITY PRICE
Here you can use tariff control for the electric additional
heat.
Set the lower tariff periods. It is possible to set two dif-
ferent date periods per year. Within these periods, it is
possible to set up to four different periods on weekdays
(Monday to Friday) or four different periods on weekends
(Saturdays and Sundays).
MENU 4.8 - TIME AND DATE
Set time and date, display mode and time zone here.
TIP
Time and date are set automatically if connec-
ted to myUplink. To obtain the correct time,
the time zone must be set.
MENU 4.9 - LANGUAGE
Choose the language that you want the information to
be displayed in here.
MENU 4.10 - COUNTRY
Select here the country in which the product was in-
stalled. This allows access to country-specific settings
in your product.
Language settings can be made regardless of this selec-
tion.
NOTE
This option locks after 24 hours, restart of dis-
play or program updating.
MENU 4.11 - TOOLS
Here, you can find tools for use.
MENU 4.11.1 - INSTALLER DETAILS
The installer's name and telephone number are entered
in this menu.
Afterwards, the details are visible in home screen,
product overview.
47Chapter 9 | Control – MenusNIBE SMO S40
To Next Page
Loading...
