EasyManua.ls Logo

Nibe VVM 325 - Technical Specifications

Nibe VVM 325
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical specifications
IP 21
3x400V
3x400V
F2030-7/F2030-9Compatible external parts
1)
F2040-8/F2040-12
9kWAdditional power
Electrical data
400V 3N~ 50 HzRated voltage
16AMax operating current
16AFuse
4 75WPower, GP1
3 45WPower, GP6
IP 21IP class
Heating medium circuit
low energyEnergy class, GP1
low energyEnergy class, GP6
0.25 (2.5 bar)MPaMax system pressure heating medium
400litres/hMin flow
70°CMax HM temp
Pipe connections
Ø22mmHeating medium
Ø22mmHot water connection
Ø22mmCold water connection
Ø22mmHeat pump connections
1)
Applies with an outdoor air heat pump at 7/45 °C (outdoor temperature/flow line temperature)
Miscellaneous
Indoor module
180lVolume, hot water heater
206lVolume, total indoor module
26lVolume buffer vessel
0.9 (9 bar)MPa (bar)Cut-off pressure, hot water heater
0.25 (2.5 bar)MPa (bar)Max permitted pressure in indoor module
Capacity hot water heating
According to EN 255-3
220lTap volume 40 °C at Eco- comfort
250lTap volume 40 °C at Normal comfort
280lTap volume 40 °C at Lux comfort
98WIdle loss according to DIN 4753-8.
Dimensions and weight
600mmWidth
615mmDepth
1775mmHeight (without base)
1805 1825mmHeight (with base)
1850mmRequired ceiling height
146kgWeight (excl. packaging and without water)
069 154Part no.
622 40 89RSK No.
NIBE™ VVM 325Chapter 12 | Technical data72