Nice Fan4-Control - User Manual

EN - Instructions and warnings for installation and use
Z-Wave Fan Coil Thermostat for 4-pipe installations
Fan4-Control
Nice
v.1.5

Nice Fan4-Control Specifications

General

Brand	Nice
Model	Fan4-Control
Category	Thermostat
Language	English

Summary

Warnings and General Precautions

Product Specification

Installation

Wiring Diagram

Fan4-Control Wiring Diagram

Details the wiring connections for the Fan4-Control unit.

Buttons and Display

Fan4-Control Display Screen

Explains the Fan4-Control device's display screen elements and icons.

Fan4-Control Operational Buttons

Describes the function of each operational button on the Fan4-Control device.

Modes of Operation

On;Off Setting

Timing Power Off

Panel Lock

Fan Speed Setting

Auto Fan Speed Mode

Fan Automation

Temperature Setting

Temperature Sensor Error

Working Mode Setting

Fan Manual Control

Cooling Mode

Heating Mode

Ventilation Mode

Manual Fan Speed Mode

Auto Mode

Parameter Menu

Parameter E01: Restore to factory default

Restores the device to its original factory settings.

Parameter E02: Power on state after power failure

Configures the device's state after an electrical power interruption.

Parameter E03: Backlight Brightness

Parameter E08: Indoor temp. calibration

Parameter E12: Anti-Freeze Protection

Enables or disables the anti-freeze protection feature.

Parameter E13: Fan Mode Option

Parameter E15: Panel Lock Function

Parameter E19: Temp. Deadband

Adding; Removing Fan4-Control from Z-Wave Network

Adding Device Using the Manual Method

Step-by-step guide to manually add the device to a Z-Wave network.

Adding Device Using the SmartStart Method

Instructions for adding the device via the SmartStart feature.

Removing Device from Yubii Home

Procedure for excluding the device from the Z-Wave network.

Association Group

Supported Z-Wave Command Classes

Z-Wave Parameter Setting

Parameter 2: Automatic Temperature Reporting

Parameter 12: Power Failure Memory (E02)

Determines device state after power interruption.

Parameter 13: Backlight Brightness (E03)

Parameter 16: Temp. Upper Limit (E06)

Parameter 17: Temp. Lower Limit (E07)

Parameter 18: Indoor Temp. Calibration (E08)

Parameter 21: External Temp. Sensor Function (E11)

Parameter 22: Anti-Freeze Protection (E12)

Activates or deactivates the anti-freeze protection.

Parameter 23: Fan Mode Option (E13)

Parameter 24: Fan Working Mode (E14)

Parameter 29: Temp. Deadband (E19)

Parameter 255: Factory Restore (E01)

Initiates a factory reset procedure.