What to do if my Nice SO2000 doesn't start and the warning light flashes?
If your Nice Garage Door Opener doesn't start and the warning light is flashing, count the number of flashes. Then, refer to Table 13 (in the manual) to identify the specific issue indicated by that flash count.
What to do if my Nice SO2000 Garage Door Opener starts then reverses?
If the manoeuvre starts but is immediately followed by a reverse run with your Nice Garage Door Opener, first, check for any obstacles that might be hindering the door's movement. If no obstacles are present, the selected force value may be too low to move the type of gate, so you may need to select a higher force. Also, check whether a safety device connected to the Stop input has tripped.
What to do if my Nice SO2000 doesn't start and the BlueBUS LED is off?
If no manoeuvre starts and the “BlueBUS” LED does not flash on your Nice Garage Door Opener, check that the gearmotor is being powered with the mains voltage. Also, check whether fuses F1 and F2 are blown; if they are, identify the cause of the failure then replace the fuses with others having the same current rating and characteristics.
Why won't my Nice Garage Door Opener start and the warning light is off?
If no manoeuvre starts and the warning light is off on your Nice Garage Door Opener, check that the command is actually received. If the command reaches the Step-by-Step input, the corresponding “SbS” LED must light up; if instead the radio transmitter is used, the “BlueBUS” LED must emit two quick flashes.
Essential safety instructions and warnings for appliance installation and use.
Warnings and precautions specific to the installation process of the drive motor.
Essential checks and verification before commencing product installation.
Step-by-step instructions for mounting and fixing the gearmotor.
Important checks to perform before making any electrical connections.
Provides the wiring diagram and detailed descriptions of all electrical connections.
Process for the control unit to recognise devices connected to BlueBUS and STOP inputs.
Procedure to set the door's opening and closing limit positions.
Steps to test the automation's functionality and safety devices.
Steps for final commissioning and informing the owner of risks.
Provides instructions to resolve malfunctions and errors during installation or operation.
General| Brand | Nice |
|---|---|
| Model | SO2000 |
| Category | Garage Door Opener |
| Language | English |
To Next Page
