Nidec ID300 - Mechanical Installation: Core Procedures; Installation: Initial Checks; Installation: Handling Safety

www.usmotors.com
ID300/302 Integrated Motor Drive | Mechanical Installation
19
• A motor and drive intended for use in the vertical position may be delivered on a pallet in the
horizontal position. When the motor is pivoted, under no circumstances should the shaft be
allowed to touch the ground as the bearings may be irreparably damaged.
• Additional special precautions must be taken, as the integral motor lifting rings are not designed
for pivoting the motor.
3.3 Cooling
ThemotorwithintegratedID300/302driveisttedtothemachinelikeastandardmotorwithangeor
foot mounting. Motor ventilation cools the motor and drive. The drive fan (if present) provides additional
cooling to the drive. Ensure that the ventilation air inlet is free of obstruction.
3.4 Mountings and Positions
Themotormustbemountedinthepositionspeciedontheorder,andonabasewhichisrigidenough
topreventdistortionandvibration.Wherethemotorfeethavesixxingholes,itispreferabletouse
those which correspond to the standard dimensions for the motor power rating, or to those shown at
B2.
Ensure that there is easy access to the terminal box and the condensation drain plugs. Use lifting
equipment which is compatible with the weight of the motor and drive.
CAUTION
!