Nidec ID300 - Installation: Mounting Guidelines; Motor Mounting Guidelines

www.usmotors.com
ID300/302 Integrated Motor Drive | Mechanical Installation
21
• Failure to adhere to these recommendations can lead to premature wear of the bearings and void
the factory warranty.
All measures must be taken to ensure protection against the risks which arise when there are rotating
parts (coupling sleeve, pulley, belt, etc.).
• Ifamotorisstartedupwithoutacouplingdevicehavingbeentted,carefullysecurethekeyinits
location.
• Bewareofback-drivingwhenthemotorisswitchedo󰀨.Theappropriateprecautionsmustbe
taken:
• - For pumps, a non-return valve must be installed.
• - For mechanical devices, install a backstop or a holding brake, etc.
3.5.3 Coupling Methods
• Forfurtherdetailsonthedi󰀨erentcouplingmethods,refertotheinstallationandmaintenance
manual of
• 3 phase induction motors.
CAUTION
!