Nidec ID300 - Connections: Cable and Fuse Selection; Selecting Cables and Fuses

www.usmotors.com26
ID300/302 Integrated Motor Drive | Connections
Notes:
• The mains current value is a typical value which depends on the source impedance. The higher
the impedance, the lower the current.
• By default, the switching frequency is set to 3 kHz.
• ID300/302 are suitable for use on a circuit with a short circuit capability of not more than 5000 rms
symmetricalAmperes,480Vor230Vmaximumwhenprotectedbyfusesasspeciedabove.
Mains
Supply
Max Input
Current (A)
ID300K Ref
Fuse Ratings Cable Size
CEI UL mm
2
AWG
230V
1ph
4.5 12017 6 6
1 16
5.3 12024 6 6
8.1 12030 10 10
9.1 22035 16 15
1.5 12
12 22052 16 15
14.3 22057 16 15
10.2 32075 16 15
12.2 32087 16 15
2.5 1012.2 32120 20 20
14.8 32155 20 20
Mains
Supply
Max Input
Current (A)
ID300K Ref
Fuse Ratings Cable Size
CEI UL mm
2
AWG
460V
3ph
1.6 14012 6 6
1.5 12
2.2 14015 6 6
2.9 14018 6 6
3.4 14021 6 6
3.5 14025 6 6
3.5 14030 6 6
3.9 14033 10 10
7 24042 10 10
7.5 24050 10 10
8 24070 16 15
2.5 109.5 24085 16 15
13 34119 20 20
16 34155 25 25 4 10