Nikon 1 v2 - Page 66

64
II
Movie
Mode
In
self-timer
mode, start and stop the timer by pressing the movie-
record
button
instead
of
the shutter-release button.
In
remote
control
mode, the ML-L3 shutter-release
button
functions
as
the movie-record
button for advanced movie mode
(1Il47).
II
Using
a
Flash
When using the
built-in flash,
press the
~
button
to
raise
the flash
before shooting. Shooting
will
be interrupted
if
the
flash
is
raised while
the
self-timer
or delayed-remote timer
is
counting down.
In
remote
control
mode, the
flash
starts charging
while
the camera
is
waiting for the signal
from the remote. The camera
will only
respond
to
the shutter-release
button
on the remote control
when the
flash
is
charged.
If
red-eye reduction
(a:J
65)
is
used when
Quick response
is
selected
for
Remote control
in the setup menu
(OJ
72),
the shutter
will
be
released
about 1 second after the red-eye reduction
lamp lights.
If
2
s
delay
is
selected,
there
will be about a
2 second delay
after the shut-
ter-release
button
on the remote
control
is
pressed; the red-eye reduc-
tion
lamp will
then
light
for
about
1 second before the shutter
is
released.
IlSee
Aiso
For
information on choosing
how
long the camera will wait for a signal
from the remote,
see
page
72.
See
page
72
for information on choosing
the
shutter-release delay in
self-timer mode.