9
Introduction
Basic Setup
A language-selection dialog is displayed the first time the camera is turned
on. Choose a language and set the time and date as described below.
The Multi Selector
The multi selector is used in the steps that follow. The buttons needed to perform a
task are shown in white; if more than one button is highlighted, any of the highlighted
buttons can be used. For example, “press the multi selector up or down” is shown as
illustrated below.
12
Turn the camera on.
The language-selection screen is dis-
played.
Highlight the desired display lan-
guage and press the center of the
multi selector.
The confirmation screen is displayed.
Press the multi selector up or
down.
OK
Confirm
MENU
Cancel
DATE
OK
Confirm
No
Ye s
Set time and date?
Downloaded From camera-usermanual.com Nikon Manuals
To Next Page
Loading...
