Why is my Nikon COOLPIX P100 not focusing?
If your Nikon Digital Camera is not focusing, note that autofocus may not perform well with certain subjects. You can set AF assist in the setup menu to Auto. Ensure the subject is in the focus area when pressing the shutter-release button halfway. Also, check that the focus mode is not set to E (manual focus). You can also try turning the camera off and then on again.
Why are the monitor and electronic viewfinder blank on my Nikon COOLPIX P100 Digital Camera?
If the monitor and electronic viewfinder on your Nikon Digital Camera are blank, make sure the camera is turned on. Also, check if the battery is exhausted and replace if needed. If the camera is in standby mode, press the power switch, shutter-release button, or the c button, or rotate the mode dial. Note that the monitor and electronic viewfinder cannot be used simultaneously; press the x button to switch between them. Also, ensure that the camera is not connected to a computer via USB, or to a TV via A/V or HDMI cable. Finally, check if interval timer shooting is in progress or if the camera is connected to an electrical outlet via the Charging AC Adapter, which prevents it from turning on.
Why does my Nikon Digital Camera turn off without warning?
If your Nikon Digital Camera turns off without warning, it could be due to several reasons. The battery might be exhausted. The camera may have turned off automatically to save power. The inside of the camera may have become too hot, in which case you should leave the camera off until it cools down. The battery might be too cold. The camera may turn off if connected to the Charging AC Adapter while turned on, or if the USB cable is disconnected while connected to a computer or printer.
What to do if my Nikon Digital Camera isn't taking pictures?
If your Nikon Digital Camera isn't taking pictures when you press the shutter-release button, ensure the camera is not in playback mode by pressing the c or shutter-release button. If menus are displayed, press the d button. Check if the battery is exhausted. Note that the built-in flash won't raise during Night portrait or Backlight scene modes. If the flash indicator is blinking, it's charging. Also, the camera might be set to a shooting mode that restricts capturing a picture.
How to fix blurred pictures on my Nikon COOLPIX P100 Digital Camera?
If your Nikon Digital Camera is showing a blurred picture, consider using the flash. Also, try using vibration reduction and motion detection features. You can also select D (Best Shot Selector). For best results, stabilize the camera using a tripod, and use it with the self-timer.
What to do if no information displayed in monitor of Nikon COOLPIX P100?
If you see no information displayed on the monitor of your Nikon Digital Camera, it's possible that the shooting data and photo information are hidden. To resolve this, press the s button until the shooting data or photo information is displayed.
Why are my Nikon COOLPIX P100 Digital Camera pictures too dark?
If your Nikon Digital Camera pictures are too dark (underexposed), ensure that the flash is not set to W (off). Check that the built-in flash window is not blocked and that the subject is within the flash range. You can adjust the exposure compensation or raise the ISO sensitivity. If the subject is backlit, raise the built-in flash, set Backlight of the scene mode, or set the flash mode to X (fill flash).
What does it mean when the monitor turns off and the power-on lamp blinks rapidly on my Nikon COOLPIX P100 Digital Camera?
If the monitor turns off and the power-on lamp blinks rapidly on your Nikon Digital Camera, it indicates that the battery temperature is high. Turn off the camera and allow the battery to cool down before resuming use. If the lamp blinks for three minutes, the camera will turn off automatically, but you can also press the power switch to turn it off manually.
Why does the flash not fire on my Nikon COOLPIX P100?
If the flash on your Nikon Digital Camera does not fire, ensure that the flash is not set to W (off). Note that some scene modes cannot turn on the flash. If Smart portrait mode is selected, check if Blink proof is set to On. Also, the flash will not fire if Sport continuous mode is selected, or if another function is restricting the flash.
Why can't I use digital zoom on my Nikon COOLPIX P100?
If the digital zoom cannot be used on your Nikon Digital Camera, check if 'Off' is selected for Digital zoom in the setup menu. Also, digital zoom cannot be used in certain situations, such as when the focus mode is set to E (manual focus), or when specific scene modes like Portrait, Night portrait, Night landscape, Fireworks show, or Backlit scene HDR are selected. It is also disabled when scene auto selector is chosen, when smart portrait mode or subject tracking mode is selected, or when Multi-shot 16 is set for Continuous in the shooting menu.
General| Megapixel | 10.3 MP |
|---|---|
| Camera type | Compact camera |
| Sensor type | CCD |
| Image stabilizer | Yes |
| Image sensor size | 1/2.3 \ |
| Maximum image resolution | 3648 x 2736 pixels |
| Optical zoom | 26 x |
| Focal length range | 4.6 - 120 mm |
| Interface | USB 2.0 |
| Digital SLR | No |
| Effective sensor resolution | 10600000 pixels |
| Focal length (35mm film equivalent) | 26 - 678 mm |
| Focus adjustment | Auto |
| Closest focusing distance | 0.01 m |
| ISO sensitivity | 160, 200, 400, 800, 1600, 3200 |
| Light exposure modes | aperture priority AE, auto, manual, shutter priority AE |
| Internal memory | 43 MB |
| Compatible memory cards | sd |
| Maximum video resolution | 1920 x 1080 pixels |
| Display diagonal | 3 \ |
| Display resolution (numeric) | 460000 pixels |
| Product color | Black |
| Battery type | EN-EL5 |
| Battery life (CIPA standard) | 250 shots |
| Viewfinder type | Electronic |
Weight and Dimensions| Depth | 98.6 mm |
|---|---|
| Width | 114.4 mm |
| Height | 82.7 mm |
| Weight | 481 g |
To Next Page
