26 Basic Photography and Playback
Taking Pictures with the Self-Timer
The camera is equipped with ten- and three-second timers for self-portraits and
to reduce blur. When using the self-timer, mount the camera on a tripod or rest
it on a flat, level surface. Be sure to turn vibration reduction off when using a tri-
pod (B 87).
The self-timer lamp will blink until one second before
the picture is taken, staying lit during the final sec-
ond to warn that the shutter is about to be released.
1
Display self-timer menu.
2
Highlight option.
• 10s: 10s timer. Use for self portraits.
• 3s: 3s timer. Use to reduce blur.
3
Make selection (to exit without changing
mode, wait five seconds). Selection
appears next to Y icon in display.
4
Frame picture and press shutter-release
button halfway to set focus and exposure.
5
Start timer; display in monitor shows sec-
onds remaining before shutter is released.
To stop timer before picture is taken, press
shutter-release button again.
Self-timer
Self-timer
9
To Next Page
Loading...
