Connecting to Televisions, Computers, and Printers 55
Viewing Pictures on TV
1
Check that the option selected for Interface>
Video mode matches the video device (B 89),
and then turn the camera off.
2
Connect the camera to the TV using the supplied EG-CP14 A/V cable. Con-
nect the black plug to the camera, the yellow plug to the video-in jack on
the TV, and the white plug to the audio-in jack.
3
Tune the television to the video channel. If in doubt, consult the documen-
tation for the TV.
4
Press and hold the G button to turn the camera on. The camera monitor
will remain off and the television will show the image normally displayed in
the monitor.
D Connecting Cables
Do not use force or attempt to insert or remove the connectors at an angle.
To Next Page
Loading...
