Name: Nikon Coolpix S1
Brand: Nikon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

VAA35001-R.3666.A

- A17 ･ S1 -

4. Initial image data writing and Firmware updating

Device

・ AC adapter (EH-63)　

・ Updating SD card × 1　

[How to create an updating SD card]

1) Format SD card on PC.

2) Create a folder named "rmware" in the root directory of the SD card.

3) Copy "rmware.bin" into the created folder.

4) Copy "nanddat.bin" into the root directory of the same SD card.

Note) When only rmware updating is performed without replacing CP-1 PCB, copying "nanddat.bin" into the SD

card is NOT necessary.

Procedure

・ Turn the camera OFF and connect the AC adapter.

・ Insert the updating SD card into camera.

・ Turn on the power of the camera.

・ Press the [MENU] button and set up the Shooting menu.

・ Highlight and select "Firmware version". The menu for initial image data writing appears. (Fig. 1)

Write the data of initial images, and go on to update the rmware.

・ Select "Yes", and press the decision button to carry out data-writing of initial images. (Fig.2)

Note: Do NOT turn power OFF during updating.

(Fig.1)

(Fig.2)

Other manuals for Nikon Coolpix S1

Questions and Answers:

Need help?

Do you have a question about the Nikon Coolpix S1 and is the answer not in the manual?

General