Nikon CoolPix S6000 - Shooting for a Panorama

61
Shooting Suited to Scenes (Scene Mode)
More on Shooting
Shooting for a Panorama
The camera focuses on the subject at the center of the frame. Use a tripod for the
best results. Set Vibration reduction (A 129) to Off in setup menu (A 120)
when using a tripod to stabilize the camera.
1 Press the A button in shooting
mode to display the shooting-
mode selection menu and use the
rotary multi selector to select p
(Panorama assist) scene mode
(A 51).
Panorama direction icons are displayed to
show the direction in which pictures will be joined.
2 Use the rotary multi selector to choose the
direction and press the k
button.
Select the direction in which pictures will be joined in the
completed panorama; right (I), left (J), up (K), or down
(L).
The yellow panorama direction icon (I I) is displayed for
the current direction and the direction is fixed when the
k button is pressed. The icon changes to the white fixed direction I icon.
If necessary, apply flash mode (A 30), self-timer (A 32), macro mode (A 33), and
exposure compensation (A 34) settings with this step.
Press the k button again to choose a different direction.
3 Frame the first portion of the
panorama scene and take the first
picture.
One third of the picture will be displayed as
translucent.
4 Take the next picture.
Frame the next picture so that one third of the
frame overlaps the first picture, and press the
shutter-release button.
Repeat this process until the necessary
number of pictures has been taken to
complete the scene.
Panorama assist
8
8
F 3.7
F3.7
1 / 2 5 0
1 /250
7
7End
End
End