91
d
Image quality is set by pressing
the T button and rotating the
main command dial until the
desired setting is displayed in the
rear control panel.
A NEF (RAW) Images
NEF (RAW) images can be viewed on the camera or using software such
as Capture NX 2 (available separately; 0 393) or ViewNX 2 (available on
the supplied ViewNX 2 installer CD).
JPEG copies of NEF (RAW) images
can be created using the NEF (RAW) processing option in the retouch
menu (0 372).
A NEF+JPEG
When photographs taken at settings of NEF (RAW) + JPEG are viewed
on the camera with only one memory card inserted, only the JPEG
image will be displayed.
If both copies are recorded to the same
memory card, both copies will be erased when the photo is deleted.
If
the JPEG copy is recorded to a separate memory card using the
Secondary slot function > RAW primary, JPEG secondary option,
deleting the JPEG copy will not delete the NEF (RAW) image.
A The Image Quality Menu
Image quality can also be adjusted using the
Image quality option in the shooting menu
(0 293).
T button Main
command dial
Rear control panel
To Next Page
Loading...
