116
k
Mirror up Mode
Choose this mode to minimize blurring caused by camera
movement when the mirror is raised. Use of a tripod is
recommended.
1 Select mirror up mode.
Press the release mode dial
lock release and turn the
release mode dial to M
UP.
2 Raise the mirror.
Frame the picture, focus, and then press
the shutter-release button the rest of the
way down to raise the mirror.
3 Take a picture.
Press the shutter-release button all the
way down again to take a picture. To
prevent blurring caused by camera
movement, press the shutter-release button smoothly, or use
an optional remote cord (0 394). The mirror lowers when
shooting ends.
D Mirror Up
While the mirror is raised, photos can not be framed in the
viewfinder and autofocus and metering will not be performed.
A Mirror up Mode
A picture will be taken automatically if no operations are performed for
about 30 s after the mirror is raised.
Release mode dial
To Next Page
Loading...
