216
t
Interval Timer Photography
The camera is equipped to take photographs automatically at
preset intervals.
1 Select Interval timer
shooting in the
shooting menu.
Press the G button to
display the menus.
Highlight Interval timer
shooting in the shooting
menu and press 2.
D Before Shooting
Select a release mode other than self-timer (E) when using the interval
timer.
Before beginning interval timer photography, take a test shot at
current settings and view the results in the monitor.
Before choosing a starting time, select Time zone and date in the setup
menu and make sure that the camera clock is set to the correct time and
date (0 31).
Use of a tripod is recommended.
Mount the camera on a tripod before
shooting begins.
To ensure that shooting is not interrupted, be sure the
camera EN-EL18 battery is fully charged. If in doubt, charge the battery
before use or use an EH-6b AC adapter and EP-6 power connector
(available separately).
G button
To Next Page
Loading...
