115
k
4 Start the timer.
Press the shutter-release
button all the way down to
start the timer.
The self-timer
lamp will start to flash. Two seconds before the photograph is
taken, the self-timer lamp will stop flashing.
The shutter will
be released about ten seconds after the timer starts.
To turn the self-timer off before a photograph is taken, turn the
release mode dial to another setting.
A A
Time (bulb) exposures can not be recorded using the self-timer. A fixed
shutter speed will be used if a speed of A is selected in exposure
mode h.
A See Also
For information on choosing the duration of the self-timer, the number
of shots taken, and the interval between shots, see Custom Setting c3
(Self-timer, 0 317).
For information on setting a beep to sound during
the timer count-down, see Custom Setting d1 (Beep, 0 318).
To Next Page
Loading...
