Nikon D4 - Page 164

138
Z
At values other than ±0.0, the 0 at the
center of the exposure indicators will
flash (exposure modes e, f, and g only)
and a E icon will be displayed in the
viewfinder and top control panel after
you release the E button.
The current
value for exposure compensation can be confirmed in the
exposure indicator by pressing the E button.
Normal exposure can be restored by setting exposure
compensation to ±0.0.
Exposure compensation is not reset when
the camera is turned off.
A Exposure Mode h
In exposure mode h, exposure compensation affects only the exposure
indicator; shutter speed and aperture do not change.
A Using a Flash
When a flash is used, exposure compensation affects both flash level
and exposure, altering the brightness of both the main subject and the
background.
Custom Setting e4 (Exposure comp. for flash, 0 325) can
be used to restrict the effects of exposure compensation to the
background only.
A See Also
For information on choosing the size of the increments available for
exposure compensation, see Custom Setting b3 (Exp./flash comp. step
value, 0 313).
For information on making adjustments to exposure
compensation without pressing the E button, see Custom Setting b4
(Easy exposure compensation, 0 314). For information on
automatically varying exposure, flash level, white balance, or Active
D-Lighting, see page 139.