Nikon D4 - Page 294

268
Q
5 Start Nikon Transfer 2.
If a message is displayed prompting you to choose a program,
select Nikon Transfer 2.
6 Click Start Transfer.
At default settings, all the pictures on
the memory card will be copied to the
computer (for more information on
using Nikon Transfer 2, start ViewNX 2 or
Nikon Transfer 2 and select ViewNX 2
Help from the Help menu).
7 Turn the camera off and disconnect the USB cable
when transfer ends.
Nikon Transfer 2 will close automatically when transfer is
complete.
A Windows 7
If the following dialog is displayed, select Nikon Transfer 2 as
described below.
1 Under Import pictures and
videos, click Change program.
A program selection dialog will
be displayed; select Import file
using Nikon Transfer 2 and
click OK.
2 Double-click Import file.
D During Transfer
Do not turn the camera off or disconnect the USB cable while
transfer is in progress.
Start Transfer