332
U
❚❚ Press + command dials
Selecting Press + command dials displays the following options:
Option Description
i
Choose
image area
Press the Fn button and
rotate a command dial to
choose from pre-selected
image areas (0 85).
Selecting Choose image
area displays a list of image
areas; highlight options and
press 2 to select or deselect, then highlight Done
and press J.
$
Shutter spd
& aperture
lock
Press the Fn button and rotate the main command
dial to lock shutter speed in modes f and h; press the
Fn button and rotate the sub-command dial to lock
aperture in modes g and h. See page 133 for more
information.
v
1 step spd/
aperture
If the Fn button is pressed when the command dials
are rotated, changes to shutter speed (exposure
modes f and h) and aperture (exposure modes g and
h) are made in increments of 1 EV, regardless of the
option selected for Custom Setting b2 (EV steps for
exposure cntrl, 0 313).
w
Choose non-
CPU lens
number
Press the Fn button and rotate a command dial to
choose a lens number specified using the Non-CPU
lens data option (0 228).
y
Active
D-Lighting
Press the Fn button and rotate the command dials to
adjust Active D-Lighting (0 184).
n
Shooting
menu bank
If this option is selected, the shooting menu bank can
be selected by pressing the Fn button and rotating a
command dial.
None
No operation is performed when the command dials
are rotated while the Fn button is pressed.
To Next Page
Loading...
