407
n
5 Close the clock battery chamber.
Slide the clock battery chamber cover
towards the back of the main battery
chamber until it clicks into place.
6 Replace the main battery.
Reinsert the EN-EL18.
7 Set the camera clock.
Set the camera to the current date and
time (0 31).
Until the date and time have
been set, the B icon will flash in the top
control panel.
ACAUTION
Use only CR1616 lithium batteries. Using another type of battery could
cause an explosion.
Dispose of used batteries as directed.
D Inserting the Clock Battery
Insert the clock battery in the correct orientation.
Inserting the battery
incorrectly could not only prevent the clock from functioning but could
damage the camera.
To Next Page
Loading...
