420
n
❚❚ Shooting
Camera takes time to turn on: Delete files or folders.
Shutter-release disabled:
• Memory card is full (0 33, 41).
• Release locked is selected for Custom Setting f12 (Slot empty release
lock; 0 338) and no memory card is inserted (0 33).
• CPU lens with aperture ring attached but aperture not locked at highest
f-number.
If B is displayed in the top control panel, select Aperture
ring for Custom Setting f10 (Customize command dials) > Aperture
setting to use lens aperture ring to adjust aperture (0 336).
• Exposure mode f selected with A selected for shutter speed
(0 425).
Camera is slow to respond to shutter-release button: Select Off for Custom Setting
d4 (Exposure delay mode; 0 319).
Only one shot taken each time shutter-release button is pressed in continuous release
mode: Turn HDR off (0 186).
Photos are out of focus:
• Rotate focus-mode selector to AF (0 97).
• Camera unable to focus using autofocus: use manual focus or focus lock
(0 105, 108).
Full range of shutter speeds not available: Flash in use.
Flash sync speed can be
selected using Custom Setting e1 (Flash sync speed); when using
compatible flash units, choose 1/250 s (Auto FP) for full range of shutter
speeds (0 323).
Focus does not lock when shutter-release button is pressed halfway: Camera is in
focus mode AF-C: use the center of the sub-selector to lock focus (0 105).
Can not select focus point:
• Unlock focus selector lock (0 103).
• Auto-area or face-priority AF selected for AF-area mode; choose another
mode (0 100).
• Camera is in playback mode (0 235).
• Menus are in use (0 283).
• Press shutter-release button halfway to start standby timer (0 45).
Image size can not be changed: Image quality set to NEF (RAW) (0 90).
Camera is slow to record photos: Turn long exposure noise reduction off
(0 302).
To Next Page
Loading...
