41
s
3 Check the number of exposures remaining.
The top control panel shows the
number of photographs that can be
taken at current settings (values over
1,000 are rounded down to the
nearest hundred; e.g., values between
2,900 and 2,999 are shown as 2.9 K).
If
two memory cards are inserted, the
displays show the space available on
the card in the primary slot (0 95).
When this number reaches zero, A will
flash in the exposure-count displays
while the shutter-speed displays will
show a flashing n or j and the
icon for the affected card will flash.
Insert another memory card or delete
some photos.
To Next Page
Loading...
