14
Image Transfer
Image transfer is used to upload photographs and movies to the
computer from a camera memory card. The explanation that
follows assumes that existing pictures are used.
1 Display network profiles.
In the setup menu, select Network >
Network settings to display the profiles
list. Image transfer profiles are indicated
by a K icon. Highlight a profile and
press J to select the highlighted profile
and return to the network menu.
2 Select Network connection.
Highlight Network connection and
press 2.
3 Select Enable.
Highlight Enable and press J to
connect to the network and return to
the network menu.
The profile name will be displayed in
green when a connection is established.
To Next Page
