118
r
3 Press J.
Press J to save settings and return to the
shooting menu.
If white balance has been
fine-tuned, an asterisk (“E”) will be displayed
in the control panel.
❚❚ The L (U) Button
At settings other than K (Choose color temp.) and
L (Preset manual), the L (U) button can be
used to fine-tune white balance on the amber (A)–
blue (B) axis (0 117; to fine-tune white balance when
K or L is selected, use the shooting menu as
described on page 117).
Six settings in both
directions are available; each increment is equivalent
to about 5 mired (0 119).
Press the L (U) button
and rotate the sub-command dial until the desired
value is displayed in the control panel.
Rotating the
sub-command dial to the left increases the amount of
amber (A).
Rotating the sub-command dial to the
right increases the amount of blue (B).
At settings
other than 0, an asterisk (“E”) appears in the control
panel.
L (U) button Sub-comman
To Next Page
Loading...
