36
s
3 Check the number of exposures
remaining.
The control panel and viewfinder show the
number of photographs that can be taken at
current settings (values over 1,000 are rounded
down to the nearest hundred; e.g., values
between 2,000 and 2,099 are shown as 2.0 K).
If two memory cards are inserted,
the displays show the space available on the card in Slot 1 (0 30).
When the
number of exposures remaining reaches A, the number will flash, n or j
will flash in the shutter-speed displays, and the icon for the affected card will
flash.
Insert another memory card (0 29) or delete some photos (0 47, 189).
Step 2: Select i or j Mode
To shoot where use of a flash is prohibited,
photograph infants, or capture natural lighting under
low light conditions, rotate the mode dial to j.
Otherwise, rotate the mode dial to i.
j mode i mode
A Camera Off Display
If the camera is turned off with a battery and memory card
inserted, the memory card icon and number of exposures
remaining will be displayed (some memory cards may in
rare cases only display this information when the camera is
on).
Mode dial
Control panel
To Next Page
Loading...
