122
r
Choosing a Color Temperature
When K (Choose color temp.) is selected for white
balance, color temperature can be selected by
pressing the WB button and rotating the sub-
command dial.
The color temperature is displayed in
the control panel.
D Choose Color Temperature
Note that the desired results will not be obtained with flash or fluorescent lighting.
Choose
N (Flash) or I (Fluorescent) for these sources.
With other light sources, take a test shot to
determine if the selected value is appropriate.
A The White Balance Menu
Color temperature can also be selected in the white
balance menu.
Note that the color temperature with the
WB button and the sub-command dial replaces the value
selected in the white balance menu.
WB button Sub-command dia
To Next Page
Loading...
