133
J
Modifying Picture Controls
Existing preset or custom Picture Controls (0 136) can
be modified to suit the scene or the user’s creative
intent.
Choose a balanced combination of settings
using Quick adjust, or make manual adjustments to
individual settings.
1 Select a Picture Control.
Highlight the desired Picture Control in the Set
Picture Control menu (0 131) and press 2.
2 Adjust settings.
Press 1 or 3 to highlight the desired setting and
press 4 or 2 to choose a value (0 134).
Repeat
this step until all settings have been adjusted, or
select Quick adjust to choose a preset
combination of settings.
Default settings can be
restored by pressing the O button.
3 Save changes and exit.
Press J.
A Modifications to Original Picture Controls
Picture Controls that have been modified from default
settings are indicated by an asterisk (“*”).
To Next Page
Loading...
