Nikon SB-5000 - SJ-5 Color Filter Notes and White Balance; SJ-5 Color Filter Precautions; Camera White Balance with Color Filters

E-11
E
Functions
En-03
v Notes on using SJ-5 color filters
• These filters are consumable items. Replace them when they deteriorate
or their colors fade.
• The heat generated from the flash head can warp the filters. However,
this will not affect their performance.
• Scratches on the filters will have no effect on performance unless the
filters fade in color.
• To remove dust or dirt, wipe the filter lightly with a soft, clean cloth.
Color compensation filters, color filters and
camera’s white balance settings
When a color compensation filter is attached to the SB-5000 while
the camera’s white balance is set to auto or flash, filter information is
automatically transmitted to the camera, and the camera’s optimum white
balance is automatically adjusted to give the correct color temperature.
• When an SJ-5 color filter is attached to the SB-5000, set the camera’s
white balance to auto, flash or direct sunlight.
• When using the SB-5000 with a camera not equipped with filter
detection (D2 series, D1 series, D200, D100, D80, D70 series, D60, D50,
D40 series), set the camera’s white balance according to the filter in use.
• For details about white balance, see the camera user's manual.