Nikon WR-1 User Manual

User's Manual
Wireless Remote Controller
En
Printed in Japan
SB3B01(11)
6MBJ0811-01
No reproduction in any form of this manual, in whole or in part (except
for brief quotation in critical articles or reviews), may be made without
written authorization from NIKON CORPORATION.

Nikon WR-1 Specifications

General

Brand	Nikon
Model	WR-1
Category	Remote Control
Language	English

Summary

Introduction

Parts of the WR-1

Overview of the WR-1 controls and their functions.

The Display

Inserting Batteries

Connecting WR-1 Units

Using the WR-1: The Basics

Step 1: Position the Tx/Rx/OFF Switches

Setting the Tx/Rx/OFF switches on WR-1 units.

Step 2: Set the Units to the Same Channel

Configuring WR-1 units to use the same communication channel.

Step 3: Pair the Units

Step 4: Group the Units

Step 5: Take Pictures

Using the WR-1 transmitter to capture images.

Controlling Multiple Cameras

Simultaneous Release

Triggering multiple cameras to shoot at the exact same time.

Synchronized Release

Groups

Menus

LINK MODE

BODY NO.

PAIRING

SPECIAL

Interval Timer Photography

Setting up automatic shutter release at preset intervals.

Release Hold Time

Relay

Release Delay

ID Mode

Viewing and Changing Camera Settings (D7100 Only)

Adjust camera settings

Troubleshooting

The unit does not turn on (no indicators appear in the display):

Troubleshooting power issues and display indicators.

The camera does not respond to the transmitter shutter-release button:

Resolving issues where the camera does not respond to the transmitter.

The unit beeps twice and the camera shutter is not released:

Diagnosing issues with beeping units and non-responsive shutters.

Precautions for Use

Specifications

Wireless Remote Controller WR-1

Detailed technical specifications for the WR-1 model.