nilan Compact S Series User Manual

Subject to alterations Page 16 of 33
Hotwater
The ”Hotwater” menu enables you to activate and de-activate the electrical heating element in the
hot water tank.
When the heating element is set to ON, a ”w” will occur in the main menu, when the heating ele-
ment is in use.
AUTO W
”>2<” 19°C
Options that flash are indicated by ” ”
On the CTS602 control panel, press:
- ESC to return to the previous menu
- p to scroll upwards or downwards through the menus or to
adjust the setting of an activated menu option
- ENTER to activate a menu option
- ENTER to confirm a menu option setting
- OFF switch off the controls
- ON to switch on the controls
HOTWATER
ENTER
EL SUP
ON
EL SUP
”ON”
LEGIONEL
”MON”
ENTER
ENTER
ENTER
ENTER
ENTER
EL SUP
”OFF”
LEGIONEL
OFF
LEGIONEL
”OFF”
A weekday can
be chosen,
where the
hotwater will be
warmed up to
65°C between
01.00 and 06.00
o’clock.
The legionella
fuction is not
active.
SERVICE
ENTER
DEFROST
INLET
CONTROL
TEMP.
CONTROL
PRESET
OFF
RESTART
OFF
ROOM
CONTROL
AIR
EXCHANGE
INLET
HEATING
AIR
QUALITY
PRIORITY
”0"°C
Temperature for prioritizing the
hot water. (All energy in the
exhaust air is delievered to the
hot water). The setting is
suptracted to T12(the temperature
in the bottom of the hot water
tank).
MANUAL
OFF
PRIORITY
”0"°C
ENTER
MODBUS
ADR 30
DATALOG
INTV 10
Figur 11: The "Hotwater" Menu

nilan Compact S Series Specifications

General

Brand	nilan
Model	Compact S Series
Category	Control Panel
Language	English