Subject to alterations Page 9 of 33
Condensation drain/water trap
Compact S is supplied with 20mm condensation outlet (PVC, GF fittings). The unit is also equipped
with built-in water trap.
The condensation outlet must be led frost-free with a steady decline of at least 1 cm/m to
the nearest drain. The safety valve overflow must also be led to a drain.
In order to prevent ice formation, it may be necessary to equip the condensation outlet
with a heating cable where frost is possible Protecting the condensation outlet from frost
is the responsibility of the fitter.
To Next Page
Loading...
