nilan Compact S Series - Inlet Control Configuration; Compressor Restart Delay Setting

Subject to alterations Page 21 of 33
Inlet control
The inlet control menu makes it possible to set the time in which the compressor has to be shut off
before restart.

Parameters in the INLET CONTROL menu should only be set by experienced control
technicians.
On the CTS602 control panel, press:
- ESC to return to the previous menu
- p to scroll upwards or downwards through the menus or to
adjust the setting of an activated menu option
- ENTER to activate a menu option
- ENTER to confirm a menu option setting
- OFF switch off the controls
- ON to switch on the controls
INLET
HEATING
TEMP.
CONTROL
HOTWATER
AIR
EXCHANGE
DEFROST
SERVICE
ENTER
RESTART
OFF
MANUAL
OFF
PRESET
OFF
ROOM
CONTROL
INLET
CONTROL
HEATPUMP
RST 6m
ENTER
ENTER
Minimum time in
minutes for compressor
to be shut off before
restart
AIR
QUALITY
MODBUS
ADR 30
DATALOG
INTV 10
Figur 16: The "Inlet control" Menu