Niles ZR-6 - Including Distributed Video with a Niles VS-6 High Definition Component Video Switcher

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-437316
INCLUDING DISTRIBUTED VIDEO WITH A NILES VS-6 HIGH DEFINITION
COMPONENT VIDEO SWITCHER
OVERVIEW
A Niles VS-6 High Defi nition Component Video Switcher (FG01429) is added to distribute high defi nition video to displays in any
of the six zones.
CONTROL CONNECTION
A 3.5 mm stereo mini plug cable is connected between the ZR-6 MultiZone Receiver’s High Output Flasher Output Port to the VS-6 High
Defi nition Component Video Switcher’s IR input.
SOURCE DEVICES
The audio outputs from the source devices are routed to the ZR-6 MultiZone Receiver and the video outputs to the VS-6 High Defi nition
Component Video Switcher. When source selection sequences are stored in the ZR-6, video source selection is programmed using the
VS-6 codes which are stored in the ZR-6’s Library 2. Source inputs on the VS-6 must match those of the ZR-6. That is, source 3 on the
ZR-6 must connect to input 3 on the VS-6.
BALANCED VIDEO OUTPUT
The balanced video output from the VS-6 is sent to the video displays using CAT-5 cabling connected to Niles C5-HDDAWM Wall Mount
CAT-5 Component Video & Digital Audio Baluns (FG01374).
SYSTEM WIRING DIAGRAMS