FORM NO. 56043107 - Advolution
™
2710 / UHR 70-1700 - 25
BURNISHING SYSTEM
TROUBLESHOOTING GUIDE ELECTRICAL
Symptom
Pad drive motor will not run. Part B (Load Circuit)
Note :Do all testing with key switch on and seat switch activated. Have Pad R/L switch activated and deck in burnishing ready position and drive pedal
engaged.
BURNISHING SYSTEM
TROUBLESHOOTING GUIDE ELECTRICAL
Symptom
Active dust control not working.
Note :Do all testing with the key switch ON, emergency switch closed, seat switch activated, pad switch activated, drive pedal engaged and the vac motor
switch turned ON.
To Next Page
Loading...
