EasyManuals Logo

Nilfisk-Advance CMAX 28/34ST User Manual

Nilfisk-Advance CMAX 28/34ST
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
2 - FORM NO. 56043071 CMAX
28/34ST / I-MAX
28/32C, BA 750/850ST, BA 750C
INTRODUCTION
This manual will help you get the most from your CMAX
28/34ST, I-MAX
28/32C, BA 750/850ST & BA 750C. Read it thoroughly before servicing
the machine.
Note: Bold numbers and letters in parentheses indicate an item illustrated on pages 9-10.
PARTS AND SERVICE
Repairs, when required, should be performed by your Authorized Nilfisk-Advance Service Center, who employs factory trained service personnel,
and maintains an inventory of Nilfisk-Advance original replacement parts and accessories.
Call the NILFISK-ADVANCE DEALER named below for repair parts or service. Please specify the Model and Serial Number when discussing
your machine.
(Dealer, affix service sticker here.)
NAME PLATE
The Model Number and Serial Number of your machine are shown on the Nameplate on the machine. This information is needed when ordering
repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future reference.
MODEL NUMBER
SERIAL NUMBER
TRANSPORTING THE MACHINE
CAUTION!
Before transporting the machine on an open truck or trailer, make sure that . . .
The machine is tied down securely - see tie-down locations (21).
•All access doors and covers are secured (tape and strap as needed).
TOWING
CAUTION!
If the machine must be towed or pushed, make sure the Master On/Off Key Switch (B) is in the OFF position and do not move the
machine faster than a normal walking pace (2-3 mph, 3-5kph) and for short distances only. Note: Disconnecting the wheel drive motor
wiring connector will make a disabled machine easier to push.
OTHER MANUALS AVAILABLE FOR YOUR MACHINE
The following manuals are available from the Nilfisk-Advance Literature Service Department (order according to model name and machine’s serial
number):
I-MAX™ 28C, 32C / BA 750C / CMAX™ 34ST Parts List - Form Number 56042422
CMAX™ 28ST / BA 750ST / BA 850ST Parts List - Form Number 56042423
All Models covered in this manual Operation Manuals - Form Numbers
56041518 (Danish, Norwegian, Swedish, Finnish)
56041519 (English, German, French, Dutch)
56041520 (Spanish, Portuguese, Italian, Greek)
GENERAL INFORMATION

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-Advance CMAX 28/34ST and is the answer not in the manual?

Nilfisk-Advance CMAX 28/34ST Specifications

General IconGeneral
BrandNilfisk-Advance
ModelCMAX 28/34ST
CategoryFloor Machine
LanguageEnglish

Related product manuals