F
Service / Repair
NEPTUNE 1&2_EN_Ver.2.1_45/2014 97
Hose Reel - Maintenance
Fig.F.92: Hose Reel - Lock Bracket
The crank/handle can be removed by the use
of e.g. two screwdrivers.
Beware not to damage the crank.
To take the drum apart, the four screws, two
on either side have to be removed.
Fig.F.93: Hose Reel - Lock Bracket
Fig.F.94: Hose Reel - Locks Fig.F.95: Hose Reel -
Pull lock bracket out to remove HP-hose.
Connector/swivel and HP-hose can now be
pulled apart.
Note washer.
Left-hand side is now free.
To release the right-hand side of the drum,
press the two locks ( arrow fig.F.64).
The drum can now be lifted out from frame.