33
PTR Modes
The PTR features the following "status" modes:
• Power OFF: In power off mode, all the electronic control
systems are dormant, with the remote module alone standing
by for start-up operation.
• Stand-by Mode: In stand-by mode, the PTR is powered on, but
not balancing. In this mode, most systems are activated, with
the motor control system dormant waiting for user-initiated
activation.
• Power Assistant Mode: In power assistant mode the PTR
balances, but the motion systems operate at half power.
• Balance Mode: In balance mode, the PTR balances and all
systems work in full power. This includes normal operation with
a rider and operation in limited speed with a rider.
• Lock Mode: In lock mode, the PTR motor is locked, thus unable
to be operated (unless unlocked via the keyfob) and it is
difficult to drag/push the PTR.
Figure 34: PTR Modes
To Next Page
Loading...
