49
Daily Maintenance
Cleaning and Storage
For best performance, clean your PTR after each use.
1. Make sure the PTR is unplugged, powered off, and the rubber
cap on the charge port is tightly sealed.
2. Gently clean your PTR with soap and water and a soft cloth.
3. For difficult-to-remove dirt or scratches, scrub with a tooth-
brush and toothpaste. Wipe clean with a wet cloth.
4. Allow the PTR to air dry, then store it indoors.
Figure 39: Avoid Submersion
WARNING
Do not wash your PTR with a power washer or high pressure hose. Avoid getting water into the charge port. Always close the charge
port cover after charging. Avoid exposure to heavy downpours or extended periods of heavy rain (including during riding, storage, or
when transporting). Clean with soap and water and a soft cloth. Make sure that the charge port is dry before you plug in the power cord.
Failure to follow these instructions could expose you to electric shock, injury, burns, or cause a fire.
CAUTION
Do not clean the PTR with alcohol, gas, diesel, acetone, or other corrosive and volatile chemical solvents. These substances may
damage the appearance and internal components of the PTR.
CAUTION
Do not store outdoors or in the direct sun. Exposure to extreme temperatures and sunlight can affect the appearance of your PTR.
To Next Page
Loading...
Need help?
General