50
Ninebot PTR Battery Pack
It is important to take good care of the battery pack on your Ninebot PTR. A well-maintained battery pack can continue to operate
at peak performance even after many miles of riding, whereas a poorly-maintained battery pack may no longer be able to hold a full
charge after only a few months.
To prolong the life of your battery pack, perform the following regular maintenance:
1. Observe and follow all safety information on the warning label
found on the battery pack.
2. Do not store battery pack at temperatures below 0˚C (32˚F) or
above 40˚C (104˚F). Exposing a battery pack to temperatures
below -20˚C (-4˚F) or above 50˚C (122˚F) will decrease its
service life.
3. Always store battery packs in a cool, dry environment. In humid
environments, water may condense inside the battery pack,
resulting in rapid damage. If you must store your battery pack
in a humid environment, seal the battery pack inside an air-
tight bag before storage.
4. Do not allow the battery pack to completely discharge, instead
charge the battery pack when it reaches 10–20% charge.
5. Keep the PTR/battery plugged in when not riding. Charging
frequently will not influence the capacity and service life of the
battery pack, but frequently draining the battery pack will.
Battery Specifications
Charging Time
before first use: 12 hours
recharge from empty: 3-4 hours
Temperature Ranges
operating: -15˚–45˚ C (5˚–113˚ F)
charging: -15˚–45˚ C (5˚–113˚ F)
storage and transport: 0˚–40˚ C (32˚–104˚ F)
damage threshold: -20˚–50˚ C (-4˚–122˚ F)
General
capacity and voltage: 620 Wh, 55.5 volts
dimensions:
42 × 22 × 13 cm
(16.5 × 8.7 × 5.1 in)
weight: 3.8 kg (8.4 lbs)
Table 8: Battery Specifications
To Next Page
Loading...
Need help?
General