TRUE METRIX
®
PRO System Comprehensive Resource Guide (GDH-FAD Enzyme) Memory 25
Memory
Note: The use of Memory features (Averages,
test results) may not be suitable for
multiple-patient use of the system.
Check with the facility procedures/
policy before use.
View Averages (7-, 14-, and 30-Day)
The Averages feature allows viewing of the
average of all blood glucose results within
a 7-, 14-, and 30-day period. Control Test
results are not included in the Averages.
1. Start with meter off. Press and release
“•” Button. Display scrolls through 7-,
14-, and 30-day Average values.
2. Meter turns off after 2 minutes if no
buttons are pressed.
Note: If a Control Test is performed outside
the recommended testing temperature
(See the Quality Control Testing
section of this Resource Guide), the
control solution may read as a blood
test and be included in the Averages.
Note: If there are no Average values, three
dashes are displayed for 7-, 14-, and
30-day Averages.
View Results
Memory stores 500 results. When the Memory is full, the
oldest result is replaced with the newest result.
1. Press and release “•” Button. Meter displays
7-, 14-, and 30-day Averages.
2. Press and release “•” Button again to
view most recent Control Test result in
Memory. If there are no results in Memory,
dashes appear with the Memory Symbol.
3. Press “ ” Button and release to
advance to the most recent blood test.
Press “ ” Button to scroll forward
through blood results or “ ” Button
to scroll backwards through results.
• Test results marked as alternate site
display ALT Symbol.
• Control Test results display the
Control Symbol. If no Control Test
has been done Display shows dashes
and the Control Symbol.
• Test results above 240 mg/dL
display Ketone Test Alert Symbol,
when Ketone Test Alert is turned
on during meter Set Up.
No Average
30-Day Average
14-Day Average
7-Day Average
▼
▼
▼
Ketone Test
Alert Symbol
Control Symbol
Memory Symbol
Alternate Site
Symbol
Alternate Site
Symbol
Memory Symbol
To Next Page
Loading...
