5. Turn Reminders on and repeat
setting the time for next 3
Reminders (if needed).
6. Press and hold “ S ” when finished
to turn o Meter. Meter turns o
aer 2 minutes of non-use.
Note: If Alert or Testing Reminders are
set, the Alert Symbol appears in
all Displays.
Note: If battery dies or is replaced,
Alert and Testing Reminders may
have to be reset.
Exit Set-Up
Press and hold “ S ” until Meter turns o. Set-up
choices are saved.
30
Alert Symbol
Tre_OB_GutsENG_E4NPD04r22.indd 30 4/24/12 9:53 AM
To Next Page
Loading...
