GENERAL SAFETY PRECAUTIONS
INSTRUCTIONS FOR OPERATORS
Safety is your business. Obey the rules of the road, be alert at all times, operate the vehicle
defensively, stop at all intersections, be aware of all clearances, and obey special safety
regulations.
1. When approaching other traffic, slow down, sound horn, and if vision is obstructed, keep
right. Under all conditions, with a load or without, operate at a speed that will permit you to
come to a stop safely.
2. Use special care when operating on inclines. Travel slowly and do not angle or turn.
3. Do not operate on excessive grades.
4. Tow the tractor only with the drive shafts disconnected. Failure to do so will damage the
transmission.
5. Maintain a safe distance from the edge of ramps and platforms.
6. Observe all traffic regulations including speed limits.
7. Under normal traffic conditions, keep to the right.
8. Maintain a safe distance from the vehicle ahead and always keep the tractor under con
-
trol.
9. Conform to local traffic regulations when operating on public roads.
10. Never allow anyone to ride on the tractor with you except in the passenger seat.
PAGE 13
JANUARY 31, 2004
M200 MB4 Tow Tractor Manual No. 42975
IMPORTANT!
There are numerous variations in procedures, techniques, tools, and parts for servicing
the tractor, as well as in the skill of the individual doing the work. This manual cannot pos
-
sibly anticipate all such variations and provide advice or cautions as to each. Accordingly,
anyone who does not follow the instructions provided in this manual must first make sure
that they do not endanger their personal safety or tractor integrity by their choice of meth
-
ods, tools, or parts.
This manual describes processes which might require the use of chemicals, solvents,
paints, or other commercially available material. Users of this manual should obtain the
material safety data sheets (OSHA Form 20 or equivalent) from the manufacturers or sup
-
pliers of any materials to be used.
Know and follow the instructions provided by the manufacturer/supplier for the safe han
-
dling, use, storage, and disposal of these materials.
Prior to starting any task, first read
the WARNINGS or CAUTIONS in-
cluded in the text for that task.
To Next Page
