Read all safety signs on the machine and in this manual. Replace any
lost or damaged signs by ordering the part numbers shown on the safety decals
page.
SAFETY DECALS
SAFETY SIGN CARE
•
Keep Safety Signs Clean And Legible At All Times.
•
Replace Safety Signs That Are Missing Or Have Become Illegible.
•
Replaced Parts That Displayed A Safety Sign Should Also Display The Current Sign.
•
Safety Signs Are Available Form Your Dealer.
•
HOW TO INSTALL SAFETY SIGNS
•
Be Sure That The Installation Area Is Clean And Dry.
• Remove The Smallest Portion Of The Split Backing Paper.
• Align The Decal Over The Specified Area And Carefully Press The Small Portion With The
Exposed Adhesive Backing In Place.
• Remove Second Backing And Press Remaining Decal In Place.
PAGE 16
JANUARY 31, 2004
M200 MB4 Tow Tractor Manual No. 42975
WARNING
PARKING BRAKE NOT TO BE
USED FOR SERVICE BRAKE
APPLY PARKING BRAKE
BEFORE STARTING ENGINE
APPLY PARKING BRAKE
BEFORE LEAVING VEHICLE
DECAL B. PART NO. NW17237
DECAL C. PART NO. 41472
DECAL D. PART NO. 1018145
To Next Page
