noax C12 - User Manual

The provided document is a user manual for Industrial PCs with Boardversion N6, manufactured by noax Technologies AG. The manual, titled "User Manual Industrial PCs Boardversion N6" (BDA-ALL-N6-US-1.0), was copyrighted in 2003.

Function Description

The noax Industrial PC is a robust computing device designed for challenging environments. It serves as a ProTouch system, indicating a touch-enabled interface for industrial applications. The device is capable of running various operating systems, including Windows, LINUX, and QNX, offering flexibility for different industrial software requirements. The primary function is to provide reliable computing power and a user interface in demanding settings.

Important Technical Specifications

The manual details several variants of the Industrial PC, distinguished by their mainboard versions (N6A, -B, and -C) and enclosure types.

Enclosure Types:

• Compact enclosure 12 inch C12 (K12)
• Compact enclosure 15 inch C15
• Stainless steel enclosure 12 inch S12
• Stainless steel enclosure 15 inch S15 (E15)
• Panel mount enclosure 12 and 15 inch P12, P15 (FE12, FE15)

Mainboard Variants:

The type plate on the device indicates the specific mainboard version (A, B, or C).

• Version A:
  • CPU: Mobile Celeron with 400 MHz
  • Memory: Maximum 512 MB DRAM (SO-DIMM base)
  • Features: Temperature monitoring of the CPU, Real-time clock, CMOS-RAM, VGA controller C&T69030 with 4MB SD-RAM video memory, Simultaneous mode TFT display and monitor, external VGA connection.
• Version B:
  • CPU: Mobile Pentium with 700 MHz
  • Features: Same as Version A.
• Version C:
  • Features: Same as Version B, plus Compact flash slot, PC card slot, Sound, Firewire IEEE 1349.

General Technical Data (IPC):

• Rated input voltage: 24 V
• Maximum input voltage: 18 – 32 V
• Input current: Type. 1.5 A at 24 V (depends on the stage of completion)
• Power consumption during operation: Approx. 36 W
• Standby power consumption: Approx. 1 W
• Additional cards: Two combi slots for ISA / PCI cards, maximum length 7.87 inch (200 mm).
  • Maximum power consumption at 5 V: 1.5 A (per card)
  • Maximum power consumption at 12 V: 1.0 A (per card)
  • Important: Total power consumption of both cards must not exceed 20 W. Installing cards can raise internal temperature and lower the maximum specified ambient temperature.
• Fuses: F20 5A slow (socket on the mainboard). Other fuses are self-healing.

Weights:

• Industrial PC - Compact C12: Approx. 12.32 lbs / 5.6 kg
• Industrial PC – Compact C15: Approx. 21.34 lbs / 9.7 kg
• Industrial PC - Stainless steel S12: Approx. 13.20 lbs / 6.0 kg
• Industrial PC - Stainless steel S15: Approx. 18.70 lbs / 8.5 kg
• Industrial PC - Panel mount P12: Approx. 12.75 lbs / 5.8 kg
• Industrial PC - Panel mount P15: Approx. 15.18 lbs / 6.9 kg
• External table power unit (incl. installation frame): 1.10 lbs / 0.5 kg
• External power unit NEMA (IP65) (optional): 2.64 lbs / 1.2 kg

Materials:

• Enclosure C12: Noryl, fiber glass reinforced (impact resistant)
• Enclosure C15: Cycoloy C1100 HF
• Rear panel C12, C15: Powder-coated aluminum casting
• Enclosure and rear panel S12, S15: Stainless steel V2A (1.4301)
• Enclosure and rear panel P12, P15: Stainless steel V2A (1.4301)
• Touch front: UV resistant, acrylat-coated polyester film (PET) on a glass base
• External power pack: Plastic AF-303
• External power unit NEMA (IP65) (optional): Aluminum coated

Ambient Conditions:

• Air circulation: Sufficient circulation of the rear panel must be ensured.
• Ambient temperature during operation: 32F to 113F / 0 to +45° C (depending on integrated options)
• Ambient temperature for storage and transportation: -4F to 140F / -20 to +60°C
• Humidity: 5 – 90% relative humidity not condensing

External Power Units:

• Input voltage: 100-240 VAC
• Input frequency: 50-60 Hz
• Rated current: Max. 1.5 A
• Output voltage: 24 V regulated
• Output current: Ext. power unit 3 A, NEMA (IP65) power unit 3.3 A
• Approvals: UL, GS, CE, FCC

Usage Features

Installation and Setup:

• Installation Site: The Industrial PC is designed for harsh environments. It should not be exposed to direct sun or heat sources. A minimum of 0.6 inch (15 mm) space is required for air circulation. The device will automatically shut off if the temperature is outside the operating range.
• Mounting:
  • C12 and C15 Compact Enclosures: Attached via the rear panel cooling element using two guide bars with T-slots for groove stones (DIN 508/ M5x6) and screws (M5x10) with washers. Factory-installed stoppers prevent sliding and aid alignment.
  • Stainless Steel S12 and S15: Mounted to a surface following provided drilling patterns.
  • Panel Mount P12 and P15: Requires a specific cut-out for installation, with dimensions provided in the manual.
• Power Supply: External power units are available in standard table versions or NEMA4 (IP65) protected versions for wall mounting. The power unit must be mounted securely and allow for disconnection from the outlet. Only the provided power supply or an optional connection cord with an integrated fuse should be used.
• External Devices: Connect or disconnect external devices (except Hot Plug devices to USB and Firewire) only when the Industrial PC is shut off, waiting at least five seconds. Connecting cables should not be too short or stretched.

Operation:

• Operating and Indicator Devices: Located on the front panel (for C12, S12, P12 models; S15 and P15 models do not have these).
  • LEDs: POWER, INPUT, HDD, OK, ERROR.
  • Keys: BRIGHTNESS (+/-), CONTRAST (+/-), ON-OFF (I/O).
• Key Functions (Standard Settings):
  • POWER LED: Lights up when PC is on.
  • INPUT LED: Lights up on valid entry, flashes when a key is pressed.
  • HDD LED: Lights up when hard drive is accessed.
  • OK LED: Lights up after successful internal function test.
  • ERROR LED: Lights up on problem/error.
  • ON (I) key: Press for at least one second to turn on PC or CFL backlight. Press for more than 5 seconds for hard reset.
  • OFF (O) key: Press for at least 5 seconds to turn off PC or CFL backlight.
  • BRIGHTNESS (+/-) keys: Briefly tap to change brightness level, hold to continuously change brightness.
• CFL Backlight: Dims to reduced brightness 3 minutes after last key press or touch. Can be reactivated by pressing any key on an external PS2 keyboard, the ON key, touching the surface, or moving a PS/2 mouse.
• Connector Area: Includes ports for Power, Monitor, LAN, LPT 1/Floppy, Barcode, Mouse/Keyboard, USB, IEEE 1394, COM 1, COM 2, and an opening for an ISA / PCI combi slot.
  • Serial Interface Options: RS232P5 (5V output), RS232P12 (12V output), RS422DP (dual power 5V/12V), RS485DP (dual power 5V/12V), TTY20mA (current loop).
  • Safety: Plug/unplug devices only when power is off, except for USB and IEEE 1394 (Firewire).

Maintenance Features

Servicing and Cleaning:

• Safety: Turn off the device and disconnect from power supply before servicing.
• Cleaning: Use typical commercial plastic cleaners and a soft, lint-free cloth. Apply cleaner to the cloth, not directly to the PC. Clean when damp (not wet, except for IP65 devices). Do not press cleaning agent under touch seals. Clean surface and display window without applying pressure. Remove cleaning agent completely.
• Display Protection: Optional protective film is available to prevent mechanical wear. Do not use abrasive cleaning agents on the display window to avoid scratches.
• Upgrades and Maintenance: Only authorized professionals with fundamental PC knowledge should open the device. Improper work voids the warranty. Allow components to cool before touching them.
• Batteries: Use only recommended battery types. Dispose of batteries according to manufacturer's directions. Ensure CMOS battery is inserted with "+" side upwards to avoid explosion.

Troubleshooting:

• Automatic Shutdown: The device will shut off automatically if input voltage is too high/low, internal voltage is too high/low, system temperature is too high/low, or fan speed is too high/low.
• N6 Error Codes: If an error occurs, the integrated MCU displays an error code on the display section LEDs (OK, INPUT, POWER LEDs display the code instead of their normal functions). Users should note the code and contact hotline.
• Repair Handling:
  • Use the service cover letter from the noax website, fill it out completely, and enclose it with the device.
  • Back up all data before sending for repair; noax is not liable for data loss.
  • If the system is password protected, either delete the password or provide it.
  • Securely package the Industrial PC (preferably in the original noax carton) to prevent damage during transportation.
  • Recommend sending by UPS Standard. For warranty cases, noax covers UPS Standard charges but not additional express services.