Safety
BDA−N6−ALL−US−1.0 www.noax.com Page 5 of 28
1 Safety
To avoid injuries or damage, it is imperative that you read and follow the user and safety in-
structions.
The manufacturer/supplier will not be liable for any damage caused by not observing these
instructions.
1.1 Pictograms and symbols
The following pictograms and symbols are used in this operating manual.
Potential life−threatening danger sources are indicated by a warning sign with an exclama-
tion point. This sign also applies to any possible damage to the device.
Potential life−threatening danger sources from electricity are indicated by a warning sign
with a lightning symbol. This sign also applies to any possible damage to the device.
Potential life−threatening danger sources from heat are indicated by a warning sign with a
heat symbol.
Potential life−threatening danger sources from explosion are indicated by a warning sign
with an explosion symbol. This sign also applies to any possible damage to the device.
í Mandatory instructions are indicated by í.
í Particularly important instructions are also in bold.
F Numerical lists and conditions are indicated by a black dot.
" Operating instructions which have to be performed by the operator are indicated with a black arrow.
1.2 Intended Use
Your Industrial PC has been built to the latest technology and safety regulations.
í Please use the Industrial PC only when it is in a good, undamaged condition! Any problems
and/or malfunctions which could reduce safety must be corrected immediately (for example,
defective power cord or enclosure)! Our professional service will take care of any repair.
To Next Page
Loading...
