[ 81 ]
Personalization
Selecting time format
1 Press Menu 4-3-1 (Settings > Time settings > Clock).
2 Scroll to Time format, then press Select.
3 Scroll to either 24-hour or am/pm, then press Select.
Allow the network to set the clock
1 Press Menu 4-3-3 (Settings > Time settings > Auto update of date
and time).
2 Scroll to On (or Confirm first), then press Select.
Important: If you use the Auto update of date and time option
while outside your digital network, you may be prompted to enter
your own time manually (see “Manually setting the clock” on page
80). Network time will replace the time and date you set once you
re-enter your digital network.
Note: If your battery has been removed or has drained outside the
digital network, you may be prompted to enter your own time
(once the battery is replaced/recharged, and you are still outside
of the digital network).
Display or hide the clock
1 Press Menu 4-3-1 (Settings > Time
settings > Clock).
Depending on the current settings, either
Hide clock or Show clock is highlighted.
2 Press Select for Hide clock or Show clock.
To Next Page
Loading...
Need help?
General
