General information
■
Stickers in the sales
package
The stickers contain important
information for service and
customer support purposes. Keep
these stickers in a safe place.
Attach the sticker to Your details
page of this owner's guide.
■
Access codes
• Security code: This code,
supplied with the phone, protects
your phone against unauthorised
use. The preset code is 12345.
Refer to Security level in the
Security settings menu on
page 27 to see how it works.
• PIN code: This code, supplied
with the SIM card, can protect
the card against unauthorised
use.
Set on the PIN code request in
the Security settings menu (see
page 26), then the code is
requested each time the phone is
switched on.
If you enter the PIN code
incorrectly three times in
succession, the SIM card is
blocked. You need to enter the
PUK code to unblock the SIM
card and set a new PIN code.
• PIN2 code: This code is supplied
with some SIM cards and is
required to access certain
services, such as charging unit
counters.
If you enter the PIN2 code
incorrectly three times in
succession, PIN2 code blocked
shows on the display, and you will
be asked for the PUK2 code.
Change the security code, PIN
code and PIN2 code in Change
access codes in the Security
settings menu (see page 27).
Keep the new codes secret and in
a safe place separate from your
phone.
• PUK and PUK2 code: These
codes may be supplied with the
SIM card. If this is not the case,
contact your local service
provider.
If you enter PUK code incorrectly
ten times in succession, the SIM
card may no longer be used.
If you enter PUK2 code
incorrectly ten times in
succession, the PIN2 code is
discarded and you will not be
able to use the services that
require the PIN2 code.
xi
English
!!"#$%
To Next Page
Loading...
